Wire drawing machines

Cone machines

Schmidt single wire drawing machines are specially tailored to your application. Whether intermediate draw, fine draw or superfine draw, our wide product range always enables the most suitable solution for the highest wire precision and quality. The machines impress with their high level of reliability and low maintenance costs.

Each machine is equipped for a specific material:

  • Stainless steels
  • Carbon steels, bright, phosphated, galvanized or nickel-plated
  • Precious metals
  • Copper and copper alloys
  • EDM wires
  • Aluminum

Intermediate

Typ Number of dies Cone pairs Drawing Finished wire Ø
180 – 30 22 3 fully submerged 0,30 – 0,80 mm
180 – 15 19 2 fully submerged 0,15 – 0,50 mm
150 – 40 19 2 fully submerged 0,15 – 1,20 mm
150 – 40 / 13 13 2 fully submerged 0,50 – 1,20 mm

You can get more information as PDF by clicking on the machine type

Fine

Typ Number of dies Cone pairs Drawing Finished wire Ø
150 – 15 21 2 fully submerged 0,15 – 0,50 mm
100 – 8 / T 27 3 fully submerged 0,08 – 0,20 mm
100 – 8 30 3 sprayed 0,06 – 0,15 mm
30 – 3 25 3 sprayed 0,03 – 0,10 mm

You can get more information as PDF by clicking on the machine type

Ultra-Fine

Typ Number of dies Cone pairs Drawing Finished wire Ø
30 – 2 / 31 31 3 sprayed 0,02 – 0,05 mm
30 – 2 / 38 38 4 sprayed 0,015 – 0,05 mm
20 – 2 / 11-31 11 / 21 / 31 1 / 2 / 3 sprayed 0,02 – 0,25 mm
E10 20 2 drawing dies sprayed min. 0,010 mm

You can get more information as PDF by clicking on the machine type

Innovations developed by Schmidt such as the adjustable gimbal, rotating and water-cooled final drawing die holder or the water-cooled final capstan and spreader disks enable the highest wire quality even at high drawing speeds.

© Copyright 2021 media Consulting GmbH